THE TECHNOLOGY OF PRODUCTION OF MEDIEVAL STEEL FLINTS IN THE PERM PRE-URALS (METALLOGRAPHIC ANALYSIS)

Authors

  • A. R. Smertin Institute of Humanities Research of Perm Federal Research Center UB RAS; Russia Perm State University; Perm State Humanitarian Pedagogical University

Keywords:

Perm Pre-Urals, Rodanovskaya culture, the Middle Ages, flint, metallographic analysis, cultural relations

Abstract

The article is aimed at the study of steel flints. This is a special category of archaeological finds. The scope of the article is limited to the materials of the Middle Ages in the Perm Pre-Urals (Rodanovskaya culture). These tools performed several functions: utilitarian (producing fire), decorative (wearing as part of a costume) and ritual (amulet). To create a spark, the flints had to contain a high amount of carbon. Consequently, their production required the blacksmiths to know the features of the metal and the intricacies of technological operations. The flints are represented by two main types: xiphoid and double-edged. The former are typologically related to the Finno-Ugric world. They are dated to the XI – early XIII centuries. The latter originate from Ancient Russia. They date back to the end of the XI-XIV centuries. The paper presents the results of a metallographic analysis of 33 specimens of flints. They originate from 8 sites. Metallographic analysis is aimed at studying the structure of the metal and the methods of forging the object. In such studies, the main analysis and cultural-historical conclusions are based on the most widespread category of tools (knives). Here, an attempt is made to generalize on an equally high–quality category of forgings – flints. It was revealed that for xiphoid flints, the production technology was most characteristic entirely of steel (up to 54.16%). Double-bladed flints were forged mainly according to the scheme of welding a strip of steel onto an iron base (up to 66.66%). A similar situation is recorded in the materials of the neighboring Vymskaya culture. There is probably a succession of types of flints. The production technology of xiphoid flints is related to local production. In line with the ancient Russian colonization of the Urals at the turn of the XI-XII centuries. Double-edged flints and welding technology are penetrating into the Perm Pre-Urals along the Vuchegda way. The overall high quality of the forging of products and the change in technology may indicate the beginning of the modernization of the technological stereotype of the Kama craftmans.

References

Белавин А.М., Крыласова Н.Б. Древнерусские материалы в Пермском Предуралье X‒XI вв. // Поволжская археология. 2017. № 1(19). С. 284‒297. DOI: 10.24852/pa2017.1.19.284.297. EDN: YIXXZV.

Бирюков А.В., Завьялов В.И., Савельева Э.А. Технология кузнечного производства эпохи средневековья на Европейском Северо-Востоке. Сыктывкар: Институт языка, литературы и истории Коми НЦ УрО РАН, 2006. 78 с. EDN: VUQAYX.

Завьялов В.И. Ножи городища Иднакар // Материалы средневековых памятников Удмур-тии. Устинов, 1985. С. 37‒47.

Завьялов В.И. Археометаллография // Междисциплинарная интеграция в археологии: по материалам лекций для аспирантов и молодых сотрудников / отв. ред. Е.Н. Черных, Т.Н. Мишина. М.: Ин-т археологии РАН, 2016. С. 252‒278. EDN: ZFOCPD.

Завьялов В.И. История кузнечного ремесла пермян: археометаллографическое исследова-ние. Ижевск: Удмурт. ин-т истории, языка и литературы УрО РАН, 2005. 244 с. ISBN: 5-7691-1724-4. EDN: SXNXEN.

Завьялов В.И., Терехова Н.Н. Кузнечное ремесло Великого княжества Рязанского. М.: Ин-т археологии РАН, 2013. 272 с. ISBN 978-5-94375-152-3. EDN: SPBUDH.

Завьялов В.И., Терехова Н.Н. Технологические особенности кузнечной продукции из под-московных селищ XIV–XV вв. // Российская археология. 2023. № 3. С. 114‒120. DOI: 10.31857/S0869606323030212. EDN: VDFISM.

Завьялов В.И., Терехова Н.Н. Технологическое исследование железных ножей XII‒XIV вв. из поселения Усть-Шексна // Краткие сообщения Института археологии. 2025. № 279. С. 294‒303. DOI: 10.25681/IARAS.0130-2620.279.294-303. EDN: ZGTFUD.

Завьялов В.И., Терехова Н.Н. Феномен «трехслойной технологии (высокие технологии в средневековье) // Исторический формат. 2015. № 4(4). С. 21‒32. EDN: VBTMCJ.

Завьялов В.И. Черная металлообработка у древних коми-пермяков // Новые археологиче-ские памятники Камско-Вятского междуречья. Ижевск: Изд-во Удмурт. ун-та, 1988. С. 129‒161. EDN: VQSZEZ.

Колчин Б.А. Железообрабатывающее ремесло Новгорода Великого // Тр. Новгород. архео-лог. экспедиции. М.: Изд-во АН СССР, 1959. С. 7‒120. EDN: SNQEGR.

Колчин Б.А. Черная металлургия и металлообработка в Древней Руси (домонгольский пе-риод). М.: Изд-во АН СССР, 1953. 257 с. EDN: RXZZGD.

Крыласова Н.Б. Археология повседневности: материальная культура средневекового Пре-дуралья / Перм. гос. гуманит.-пед. ун-т. Пермь, 2007. 352 с. ISBN: 5-85218-317-2. EDN: QPKYLD.

Оборин В.А. Заселение и освоение Урала в конце XI – начале XVII века. Иркутск: Изд-во Иркут. ун-та. 1990. 168 с.

Перевощиков С., Волкова З. Результаты металлографического анализа железных предме-тов из Кишертских могильника и I поселения в бассейне реки Сылвы // Finno-Ugrica. 2006. № 9. С. 71–80.

Перевощиков С.Е. Железообрабатывающее производство населения Камско-Вятского междуречья в эпоху средневековья (технологический аспект). Ижевск: Изд-во Удмурт. гос. ун-та, 2002. 175 с.

Рязанов С.В. Ножи Лаишевского селища (технологический аспект) // Вестник ВЭГУ. 2012. № 2(58). С. 106‒113. EDN: OWMUSN.

Сарапулов А.Н. Еще раз об использовании железных серпов и кос-горбуш средневековым населением Верхнего Прикамья // Тр. Камской археолого-этнографической экспедиции. 2019. № 15. С. 111‒116. DOI: 10.24411/2658-7637-2019-11512. EDN: WYDJHW.

Семыкин Ю.А. Черная металлургия и кузнечное производство Волжской Булгарии в VIII – начале XIII вв. // Археология евразийских степей. Казань: Отечество, 2015. Вып. 21. 228 с. EDN HWXJDO.

Смертин А.Р. Гендерные различия в хозяйственных занятиях (по материалам Плотников-ского могильника) // Урало-Поволжская археологическая конференция студентов и моло-дых ученых: материалы Всерос. (с междунар. участием) конф., Самара, 1–4 февраля 2018 г. Самара: Изд-во Самар. ун-та, 2018. С. 395‒399. EDN: YOGKQM.

Смертин А.Р. Древнерусский импульс в земледелие верхнего Прикамья (по данным тех-нологического анализа кузнечных изделий) // VI Северный археологический конгресс: ма-териалы докл., Сургут, 8–11 октября 2024 г. Екатеринбург: Ин-т истории и археологии УрО РАН, 2024. С. 352‒354. EDN: AIXLLT.

Фёдоров-Давыдов Г.А. Кочевники Восточной Европы под властью золотоордынских ха-нов. М., 1966. 276 с.

References

Belavin, A. M., & Krylasova, N. B. (2017). Ancient Russian materials in the Perm Pre-Urals of the 10th–11th centuries. Povolzhskaya Arkheologiya, 1(19), 284–297. https://doi.org/10.24852/pa2017.1.19.284.297

Birjukov, A. V., Zav'yalov, V. I., & Savel'eva, E. A. (2006). The technology of blacksmithing in the Middle Ages in the European Northeast. Institut yazyka, literatury i istorii Komi NTs UrO RAN.

Fyodorov Davydov, G. A. (1966). The nomads of Eastern Europe under the rule of the Golden Horde khans. Nauka.

Kolchin, B. A. (1953). Ferrous metallurgy and metalworking in Ancient Russia (Pre Mongol period). Izdatel'stvo AN SSSR.

Kolchin, B. A. (1959). The ironworking craft of Novgorod the Great. In Proceedings of the Novgorod archaeological expedition (pp. 7–120). Izdatel'stvo AN SSSR.

Krylasova, N. B. (2007). Archaeology of everyday life: The material culture of the medieval Pre Urals. Permskiy gosudarstvennyy gumanitarno pedagogicheskiy universitet.

Oborin, V. A. (1990). Settlement and development of the Urals in the late 11th – early 17th century. Irkutskiy gosudarstvennyy universitet.

Perevoshchikov, S. E. (2002). Ironworking industry of the population of the Kama Vyatka interfluve in the Middle Ages (technological aspect). Udmurtskiy gosudarstvennyy universitet.

Perevoshchikov, S., & Volkova, Z. (2006). Results of metallographic analysis of iron objects from the Kishert burial ground and the First settlement in the Sylva River basin. Finno Ugrica, 9, 71–80.

Ryazanov, S. V. (2012). Knives of Laishevsky settlement (technological aspect). Vestnik VEGU, 2(58), 106–113.

Sarapulov, A. N. (2019). Once again about the use of iron sickles and pink salmon scythes by the medieval population of the Upper Kama region. Trudy Kamskoy arkheologo etnograficheskoy ekspeditsii, 15, 111–116. https://doi.org/10.24411/2658-7637-2019-11512

Semykin, Yu. A. (2015). Ferrous metallurgy and blacksmithing in Volga Bulgaria in the 8th – early 13th centuries. Otechestvo.

Smertin, A. R. (2018). Gender differences in household occupations (based on the materials of the Plotnikovsky burial ground). In Ural Volga archaeological conference of students and young scientists: Proceedings of the All Russian (with international participation) conference, Samara, February 1–4, 2018 (pp. 395–399). Samarskiy universitet.

Smertin, A. R. (2024). The Ancient Russian impulse to agriculture in the Upper Kama region (according to the technological analysis of blacksmithing products). In VI Northern Archaeological Congress: Proceedings, Surgut, October 8–11, 2024 (pp. 352–354). Institut istorii i arkheologii UrO RAN.

Zav'yalov, V. I. (1985). Knives of the Idnakar hillfort. In Materials of medieval sites of Udmurtia (pp. 37–47). Ustinov.

Zav'yalov, V. I. (1988). Black metalworking among the ancient Komi Permians. In New archaeological sites of the Kama Vyatka interfluve (pp. 129–161). Udmurtskiy universitet.

Zav'yalov, V. I. (2005). The history of blacksmithing of Permians: An archaeometallographic study. Udmurtskiy institut istorii, yazyka i literatury UrO RAN.

Zav'yalov, V. I. (2016). Archaeometallography. In E. N. Chernykh & T. N. Mishina (Eds.), Interdisciplinary integration in archaeology: Based on lectures for graduate students and young researchers (pp. 252–278). Institut arkheologii RAN.

Zav'yalov, V. I., & Terekhova, N. N. (2013). Blacksmithing of the Grand Principality of Ryazan. Institut arkheologii RAN.

Zav'yalov, V. I., & Terekhova, N. N. (2015). The phenomenon of "three layer technology" (high technology in the Middle Ages). Istoricheskiy format, 4(4), 21–32.

Zav'yalov, V. I., & Terekhova, N. N. (2023). Technological features of blacksmithing products from villages near Moscow in the 14th–15th centuries. Rossiyskaya arkheologiya, 3, 114–120. https://doi.org/10.31857/S0869606323030212

Zav'yalov, V. I., & Terekhova, N. N. (2025). Technological study of iron knives of the 12th–14th centuries from the Ust Sheksna settlement. Kratkiye soobshcheniya Instituta arkheologii, 279, 294–303. https://doi.org/10.25681/IARAS.0130-2620.279.294-303

Published

2026-04-07

How to Cite

Smertin А. Р. . (2026). THE TECHNOLOGY OF PRODUCTION OF MEDIEVAL STEEL FLINTS IN THE PERM PRE-URALS (METALLOGRAPHIC ANALYSIS). PERM UNIVERSITY HERALD. History, (1 (72), 80–88. Retrieved from http://press.psu.ru/index.php/history/article/view/11560